Home › Refrigerator Water Filters › Whirlpool › WRF993FIFM00
Water Filter for the Whirlpool WRF993FIFM00 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana

Every cartridge that fits this model — pulled live from the catalogue:
✓
WRF993FIFM00 specifics — where the filter actually lives
The filter bay on the WRF993FIFM00 upper rear of the fresh-food section in most French-door builds with interior dispensers — usually a kneeling-height or shoulder-height swap, not a teardown. This is a twist-style bay, the friendlier design: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.
Field notes: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The WRF prefix is the tell: WRF machines come from the French-door bottom-freezer program, and Whirlpool’s parts system rewards you for knowing it: one cartridge family covers the run. The -00 tail tracks the revision ladder — each rung shares the identical EDR2RXD2 bay.
WRF vs WRS — what the prefix tells you
WRF or WRS: the badge difference that does (and does not) change the filter order. WRF means French-door bottom-freezer, WRS means side-by-side. For filter shopping the distinction matters less than you would think — same line, different cabinet. The WRF993FIFM00 was built across 2016-2020 on the official record, which brackets the cartridge generation you are shopping for.
Swap it in 5 minutes

- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water

| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
WRF993FIFM00 filter questions
How do I reset the filter light on the Whirlpool WRF993FIFM00?
Lock in the new cartridge first, then hold the reset control for a few seconds — the WRF993FIFM00 manual documents the button for each panel variant.
Running the WRF993FIFM00 with an empty filter bay — does it need a cap?
You can, but unfiltered — the EDR2RXD2 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Whirlpool refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my WRF993FIFM00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →