Home › Refrigerator Water Filters › Whirlpool › VIKING-RDDFF236SS01
Water Filter for the Whirlpool VIKING-RDDFF236SS01 (EDR4RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
We cross-checked the VIKING-RDDFF236SS01 against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.
Find filters for your fridge →✓
VIKING-RDDFF236SS01 specifics — where the filter actually lives
The VIKING-RDDFF236SS01 carries its water filter inside the fresh-food cavity, position varying with dispenser spec, a spot that survives trim changes across the refrigerator run. This is a twist-style bay, the friendlier design: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.
Field notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. What pins the parts choice down is the media line: the EDR4RXD1 media line; that is the anchor every compatible listing hangs from. Revision 01 changed trim details, not the water circuit; order with confidence by model stem.
Reading the VIKING-RDDFF236SS01 model code — what the digits tell you
The VIKING-RDDFF236SS01 decodes to about 2005 to 2009 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. The model code varies with trim, but the parts logic does not: this generation runs on the EDR4RXD1 line across every cabinet variant.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
Filter light reset on the Viking VIKING-RDDFF236SS01 — how?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the VIKING-RDDFF236SS01 owner’s manual page for filter status.
Can I run the Viking VIKING-RDDFF236SS01 with no cartridge installed?
No — the EDR4RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.
Are off-brand filters safe for a Viking refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR4RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my VIKING-RDDFF236SS01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →