HomeRefrigerator Water FiltersWhirlpoolGI0FSAXVQ00

GI0FSAXVQ00
Exact-Fit Model Guide

Water Filter for the Whirlpool GI0FSAXVQ00 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GI0FSAXVQ00 replacement water filter cartridge
Replacement cartridge for this model
GI0FSAXVQ00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2008-2012
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GI0FSAXVQ00 · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2008-2012
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GI0FSAXVQ00. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

GI0FSAXVQ00 specifics — where the filter actually lives

On the GI0FSAXVQ00, the cartridge inside the fresh-food cavity, position varying with dispenser spec, the same estate every refrigerator in this family uses. This is a twist-style bay, the friendlier design: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Before you click buy, two things: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. What pins the parts choice down is the media line: this chassis drinks from the EDR4RXD1 family, one of the most cross-referenced cartridges in the Whirlpool catalog. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

Reading the GI0FSAXVQ00 model code — what the digits tell you

Working from the model code, the GI0FSAXVQ00 lands somewhere around 2008-2012; treat the window as approximate. What stays constant across the trim range: the GI0FSAXVQ00 and its siblings all drink from the EDR4RXD1 line, which keeps the parts search short.

Swap it in 5 minutes

Installing the replacement water filter in the GI0FSAXVQ00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GI0FSAXVQ00 filter questions

GI0FSAXVQ00 filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the GI0FSAXVQ00 manual maps the control by panel type.

Whirlpool GI0FSAXVQ00: bypass plug needed without a filter?

No — the EDR4RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GI0FSAXVQ00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →