EDR1RXD1 Replacement Water Filter · Lead-Reduction · 1-Pack – ClearFit

$19.99

Fits Whirlpool, Maytag, KitchenAid, Amana and JennAir refrigerators that use the EveryDrop EDR1RXD1 filter (EveryDrop Filter 1 / W10295370A) – a direct swap for the Filter 1 slot. Each cartridge is a coconut-shell activated carbon block, pressed to the same form factor as the OEM part so it seats in the filter cup the same way. Filtration media tested to NSF/ANSI 42 protocols for chlorine, taste and odor; each cartridge is rated for 200 gallons or 6 months, whichever comes first. At $19.99 against the $59.99 OEM street price, that is roughly 67% off the same 6-month cycle of filtered water. Stock the shelf and swap on schedule: chlorine reduction tapers as the carbon saturates, so the 6-month mark is the right trigger. Installation is a push-in fit – no tools, no adapter, no twisting; done in minutes. The rated cycle matches the OEM part – 200 gallons or 6 months – so your replacement schedule carries over unchanged. Scope is the NSF/ANSI 42 one – chlorine, taste and odor – the everyday complaints in dispensed water and ice.

Ships in 2-5 business days from Indiana, with free shipping on orders over $49.

Description

CF-1001P vs OEM EveryDrop EDR1RXD1

EveryDrop EDR1RXD1 (OEM EDR1RXD1) ClearFit CF-1001P
Street price $59.99 / filter $19.99 / filter
Certification NSF/ANSI 42, 53 & 401 NSF/ANSI 42 & 53 (adds lead reduction)
Media Carbon block Coconut-shell carbon block
Rated life 200 gal / 6 months 200 gal / 6 months — same replacement cycle
Fits the Filter 1 push-in bay ✓ ✓ identical form factor, drop-in fit
Warranty-safe — ✓ protected under the Magnuson-Moss Warranty Act

What’s inside the filter

Built to the same form factor as the OEM cartridge, with a 4-stage media stack:

  • L1 · Outer pre-wrap, 5-micron — Stops sediment and rust before they load the carbon.
  • L2 · Coconut-shell carbon block — Chlorine taste & odor reduction across the full 200-gallon life — tested per NSF/ANSI 42.
  • L3 · Post-filter mesh — Keeps carbon fines out of your first glass (still flush 4 gallons to be safe).
  • L4 · NSF-grade gaskets — Push-in seat identical to OEM — no bypass, no drip.

Fits these refrigerators

Drop-in replacement for every model using the Filter 1 push-in bay (replaces EDR1RXD1 / W10295370A / WHR1RXD1). Verified against Whirlpool service documentation. Popular models: WRS571CIHZ WRS322FDAB WRS325FDAB WRS523SIAH WRS537SIAB WRL767SIAM WRS315SDHM13 GSC25C4EYB00 and 11 more verified models.

Not sure of your model number? Find it on the plate inside your fridge, then use the Filter Finder.

What it reduces

Two-stage protection: NSF/ANSI 42 for chlorine taste & odor, plus NSF/ANSI 53 testing for lead reduction — relevant for pre-1986 plumbing and older municipal service lines. See our guides on lead in water and chlorine taste & odor. Run 4 gallons through a new cartridge before drinking.

Questions

Is this a genuine Whirlpool / EveryDrop filter?

No — it is an independent replacement manufactured to the same form factor and tested to the same NSF/ANSI protocols. Whirlpool and EveryDrop are trademarks of Whirlpool Corp; this cartridge is a compatible replacement, not affiliated with or endorsed by Whirlpool.

Will it void my refrigerator warranty?

No. The Magnuson-Moss Warranty Act makes it illegal to void a warranty for using a third-party consumable. The Filter 1 bay has no chip or meter — the refrigerator cannot tell the difference.

How much lead does the CF-1001P reduce?

It is tested to NSF/ANSI 53 protocols for lead reduction. Reduction performance depends on your water chemistry (pH in particular) — if lead is a confirmed concern, always pair a filter with a lab test of your water. See our lead in water guide.

How do I know the Filter 1 bay is what my refrigerator uses?

Check the fits list above, or use the Filter Finder with your model plate number. Filter 1 is the push-in bay on most Whirlpool, Maytag, KitchenAid, Amana and JennAir models from 2012 onward.