Radium in Water

Chlorine and chemical tint visible in a glass of tap water from the faucet
Home › Water Problems A–Z › Radium
EPA primary contaminant · radionuclides
Radium in Your Water
Where radium in drinking water comes from, what the official limits actually are, and which filter technologies address it — the honest version, not the marketing one.
EPA primary contaminant · radionuclides Test first — $30–50 lab kit Boiling verdict in FAQ
The short answer
Radium (Ra-226 + Ra-228 combined) carries a federal limit of 5 pCi/L — and it’s colorless, odorless, and tasteless, so testing is the only way it ever announces itself. Boiling does not remove radium (it concentrates it), and no Brita-class or fridge carbon filter claims it — two of the most-asked questions on the internet about this contaminant, answered straight: no and no. Reverse osmosis removes 90%+ (NSF/ANSI 58 with radium claim), and anion exchange resin handles it whole-house. The smart testing sequence — a cheap gross alpha screen before the expensive radium analysis — saves most well
Sources: EPA National Drinking Water Regulations · NSF test protocols — full citations in the guide below.
Test first
Know your number first
Know your number before you buy hardware: a lab mail-in test runs $30–50 and about a week. City-water households get fluoride, lead and disinfectant numbers free in the annual CCR.
Read your free water report →

The short answer on radium

Radium in Water — what comes out of the tap, and what the right filter changes

Radium (Ra-226 + Ra-228 combined) carries a federal limit of 5 pCi/L — and it's colorless, odorless, and tasteless, so testing is the only way it ever announces itself. Boiling does not remove radium (it concentrates it), and no Brita-class or fridge carbon filter claims it — two of the most-asked questions on the internet about this contaminant, answered straight: no and no. Reverse osmosis remov… The details — sources, official limits and honest removal methods — are in the complete guide: The complete radium guide.

How to remove radium — what actually works

TechnologyWhere it livesWhat to demand on paper
RO / resinPoint-of-use or whole-house system per specNamed NSF/ANSI protocol or third-party lab sheet for the exact model

If a listing claims radium reduction and cannot name the standard or show the lab sheet, assume it does not have one. That single check filters out most of the market.

Can your refrigerator filter handle radium?

No — standard carbon cartridges are not engineered for it. The technologies above are the ones that address it; your fridge filter still does its own job (chlorine, taste, and with a 53 claim, lead and cysts). Fridge cartridges are built for chlorine, taste and odor (NSF/ANSI 42), plus lead and cysts on certified 53 tiers. If radium is your concern, keep the fridge cartridge for what it does well and put the right technology where you drink: see what your fridge model takes, then match the removal stage to the contaminant.

Often found together

  • Uranium in water — same source profile or shared treatment media; check your test report for the neighbor line items.
  • Radon in water — same source profile or shared treatment media; check your test report for the neighbor line items.

Radium questions, answered straight

Does boiling water remove radium?

Boiling is a concentration step, not a filter: water leaves as steam and whatever is dissolved stays behind, so levels rise by roughly the volume lost. The only heat-based method that works is distillation — capturing and condensing the steam. For radium specifically, see the full guide.

Is my refrigerator water filter enough for radium?

No — standard carbon cartridges are not engineered for it. The technologies above are the ones that address it; your fridge filter still does its own job (chlorine, taste, and with a 53 claim, lead and cysts). Match the technology to the contaminant, not the badge on the box.

How do I find out my actual radium level?

On city water, your utility's annual Consumer Confidence Report lists it free. On a well, a lab mail-in panel is the reliable route — the test-first card above links our guide to reading the results.

What removes radium from drinking water?

The technologies with a track record for radium: ro / resin. Claims worth having come with a named standard (NSF/ANSI protocol or third-party lab sheet) — buy where the certificate names the exact part number.

Go deeper

Every contaminant, one page each

48 water problems from EPA primary, secondary and unregulated lists — sources, official limits, and which filters actually work (and which honestly don’t). Browse the Water Problems A–Z →