Home › Refrigerator Water Filters › Whirlpool › WRF989SDAB03
Water Filter for the Whirlpool WRF989SDAB03 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
WRF989SDAB03 specifics — where the filter actually lives
The filter bay on the WRF989SDAB03 in the fresh-food compartment, typically the upper back wall in most French-door layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. This is a twist-style bay, the friendlier design: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.
The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. One prefix, one chassis family: it places the machine in Whirlpool’s French-door bottom-freezer family, which pins down the cartridge line, the reset behavior, and the service documentation worth consulting. That trailing 03 is the revision counter: WRF chassis revisions share one water path, so the cartridge order never changes with it.
WRF vs WRS — what the prefix tells you
The WRF/WRS pair divides this family by layout — Chassis first: French-door bottom-freezer (WRF) versus side-by-side (WRS). The shared cartridge line covers both without adaptation. Whatever the badge on the door says, the parts reality is the EDR2RXD2 line — which is why fit listings key on chassis rather than door style.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
WRF989SDAB03 filter questions
Reset procedure for the change-filter alert on the WRF989SDAB03?
Lock in the new cartridge first, then hold the reset control for a few seconds — the WRF989SDAB03 manual documents the button for each panel variant.
Running the WRF989SDAB03 with an empty filter bay — does it need a cap?
No — run it empty if you like; the EDR2RXD2 bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a Whirlpool refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my WRF989SDAB03?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →