Water Filter for the Whirlpool WRF757SDEE01 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

WRF757SDEE01 · Quick Facts

TYPE

refrigerator

YEARS MADE

2015-2019

FILTER LOCATION

top-left of the fresh-food compartment in most French-door layouts, away from the door bins

FILTER SLOT

EveryDrop Filter 2 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

wrf757sdee00

WRF757SDEE01 · Quick Facts

Filter locationtop-left of the fresh-food compartment in most French-door layouts, away from the door bins

Filter slotEveryDrop Filter 2 bay

Replace everyEvery 6 months

Years made2015-2019

Also branded aswrf757sdee00

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for WRF757SDEE01. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

Not your model? Check the finder →

WRF757SDEE01 specifics — where the filter actually lives

On the WRF757SDEE01, the cartridge top-left of the fresh-food compartment in most French-door layouts, away from the door bins, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Owners of the WRF757SDEE01 report the same friction points: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. Decode the plate and the parts question answers itself: the WRF run is Whirlpool’s French-door bottom-freezer series; across the run, the filter bay is one of the constants. The two-digit 01 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.

WRF vs WRS — what the prefix tells you

Two prefixes, two missions: WRF covers French-door bottom-freezer, while WRS covers side-by-side. The cartridge line is usually shared across both — order by chassis, not by door count. Official listing data places the WRF757SDEE01 in 2015 to 2019 — useful, because cartridge revisions tend to track production windows.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

WRF757SDEE01 filter questions

Whirlpool WRF757SDEE01: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the WRF757SDEE01 owner’s manual lists the button location for your control panel.

Does the Whirlpool WRF757SDEE01 need a bypass plug when the filter is out?

No bypass needed: the EDR2RXD2 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my WRF757SDEE01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR2RXD2 cartridge

This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →