Home › Refrigerator Water Filters › Whirlpool › MSD265RHEB
Water Filter for the Maytag MSD265RHEB (EDR4RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
MSD265RHEB specifics — where the filter actually lives
The filter bay on the MSD265RHEB in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. Mechanically the MSD265RHEB uses a twist-in cartridge: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.
Two quirks worth knowing before you order: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. One prefix, one chassis family: MSD generally indicates the side-by-side family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. That EB suffix is trim-level shorthand. Maytag kept the EDR4RXD1 bay common to every finish in the line.
MSD vs MFI — what the prefix tells you
Two prefixes, two missions: MSD means side-by-side, MFI means French-door. For filter shopping the distinction matters less than you would think — same line, different cabinet. Catalog convention puts the MSD265RHEB near 2018-2022 — an approximation, useful for bracketing the cartridge era only.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
MSD265RHEB filter questions
Clearing the filter status light on a Maytag MSD265RHEB?
Lock in the new cartridge first, then hold the reset control for a few seconds — the MSD265RHEB manual documents the button for each panel variant.
Will the Maytag MSD265RHEB dispense water without a filter cartridge?
You can, but unfiltered — the EDR4RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Maytag refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR4RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my MSD265RHEB?
Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR4RXD1 | RECOMMENDEDUKF8001 Replacement Water Filter · 1-Pack – ClearFit | EDR4RXD1 EveryDrop Filter 4 Replacement · 1-Pack – ClearFit | UKF8001 Replacement Water Filter · 3-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $17.99 | $17.99 | $44.97 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →