Home › Refrigerator Water Filters › Whirlpool › MSD265MKES
Water Filter for the Maytag MSD265MKES (EDR4RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
MSD265MKES specifics — where the filter actually lives
Where the filter actually lives: at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically it is a quarter-turn twist-in seat: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.
Order-day practicalities: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. Read the prefix and the maintenance writes itself: in this catalog MSD is the side-by-side marker; internal layouts vary, the bay layout does not. The ES ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.
MSD vs MFI — what the prefix tells you
Prefix families here: MSD against MFI. The door count differs — side-by-side against French-door — but the bay and the cartridge order do not. Model-code reading puts the MSD265MKES at roughly 2001-2005 — treat that as approximately right, not a production guarantee.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
MSD265MKES filter questions
How to reset the water filter indicator: Maytag MSD265MKES?
Lock in the new cartridge first, then hold the reset control for a few seconds — the MSD265MKES manual documents the button for each panel variant.
Does the Maytag MSD265MKES need a bypass plug when the filter is out?
The bay self-seals: with no cartridge the MSD265MKES still dispenses, just unfiltered. No bypass plug exists for this line.
Are off-brand filters safe for a Maytag refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR4RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my MSD265MKES?
Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR4RXD1 | RECOMMENDEDUKF8001 Replacement Water Filter · 1-Pack – ClearFit | EDR4RXD1 EveryDrop Filter 4 Replacement · 1-Pack – ClearFit | UKF8001 Replacement Water Filter · 3-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $17.99 | $17.99 | $44.97 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →