Water Filter for the Maytag MSD2359KEB (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MSD2359KEB · Quick Facts

TYPE

refrigerator

YEARS MADE

2001-2005

FILTER LOCATION

low on the fresh-food side or behind the base grille in most side-by-side layouts

FILTER SLOT

EveryDrop Filter 4 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

MSD2359KEB · Quick Facts

Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts

Filter slotEveryDrop Filter 4 bay

Replace everyEvery 6 months

Years made2001-2005

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MSD2359KEB. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MSD2359KEB specifics — where the filter actually lives

The MSD2359KEB carries its water filter low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every side-by-side refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: the cartridge drops into the keyed seat and locks with a short quarter turn.

Order-day practicalities: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Prefix literacy pays here: generally a side-by-side machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. The EB tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

MSD vs MFI — what the prefix tells you

Two prefixes, two missions: side-by-side on the MSD side, French-door on the MFI side — the parts catalog runs the same cartridge across both. Model-code reading puts the MSD2359KEB at roughly 2001 to 2005 — treat that as approximately right, not a production guarantee.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MSD2359KEB filter questions

How do I reset the filter light on the Maytag MSD2359KEB?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the MSD2359KEB manual’s filter-status page has the exact spot.

Maytag MSD2359KEB: bypass plug needed without a filter?

No bypass needed: the EDR4RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MSD2359KEB?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →