HomeRefrigerator Water FiltersWhirlpoolMFX2571XEM0

MFX2571XEM0
Exact-Fit Model Guide

Water Filter for the Maytag MFX2571XEM0 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFX2571XEM0 replacement water filter cartridge
Replacement cartridge for this model
MFX2571XEM0 · Quick Facts
TYPE
refrigerator
YEARS MADE
2010-2014
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
MFX2571XEM0 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2010-2014
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for MFX2571XEM0. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

MFX2571XEM0 specifics — where the filter actually lives

The filter bay on the MFX2571XEM0 in the fresh-food compartment, placement dependent on the dispenser package, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the MFX2571XEM0 uses a twist-in cartridge: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Practical notes from the install forums: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. What pins the parts choice down is the media line: the EDR4RXD1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. Finish letter sets like M0 never alter the bay; the EDR4RXD1 line fits the whole set.

Reading the MFX2571XEM0 model code — what the digits tell you

Working from the model code, the MFX2571XEM0 lands somewhere around 2010-2014; treat the window as approximate. Fit listings tell the same story: the MFX2571XEM0 and its siblings all drink from the EDR4RXD1 line, which keeps the parts search short.

Swap it in 5 minutes

Installing the replacement water filter in the MFX2571XEM0
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFX2571XEM0 filter questions

How do I reset the filter light on the Maytag MFX2571XEM0?

Lock in the new cartridge first, then hold the reset control for a few seconds — the MFX2571XEM0 manual documents the button for each panel variant.

Does the Maytag MFX2571XEM0 need a bypass plug when the filter is out?

Nothing to buy — the EDR4RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFX2571XEM0?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →