Home › Refrigerator Water Filters › Whirlpool › MFT2976AEB01

MFT2976AEB01
Exact-Fit Model Guide

Water Filter for the Maytag MFT2976AEB01 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFT2976AEB01 replacement water filter cartridge
Replacement cartridge for this model
MFT2976AEB01 · Quick Facts
TYPE
refrigerator
YEARS MADE
2012-2016
FILTER LOCATION
in the fresh-food compartment, typically the upper back wall in most French-door layouts
FILTER SLOT
EveryDrop Filter 2 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
mft2976aeb00, mft2976aeb02, mft2976aeb03
MFT2976AEB01 · Quick Facts
Filter locationin the fresh-food compartment, typically the upper back wall in most French-door layouts
Filter slotEveryDrop Filter 2 bay
Replace everyEvery 6 months
Years made2012-2016
Also branded asmft2976aeb00, mft2976aeb02, mft2976aeb03
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

ClearFit CF-2008 EDR2RXD1 replacement filter 1-pack product photo
CF-2008

EDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit

$17.99

✓

Verified fit for MFT2976AEB01. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

MFT2976AEB01 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, typically the upper back wall in most French-door layouts, the same estate every French-door refrigerator in this family uses. It is a twist-lock bay: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Owners of the MFT2976AEB01 report the same friction points: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The MFT prefix is the tell: MFT generally indicates the French-door family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. Revision 01 changed trim details, not the water circuit; order with confidence by model stem.

MFT vs MSD — what the prefix tells you

The catalog pairs MFT with MSD, and the split matters at order time: The door count differs — French-door against side-by-side — but the bay and the cartridge order do not. Catalog convention puts the MFT2976AEB01 near 2012-2016 — an approximation, useful for bracketing the cartridge era only.

Swap it in 5 minutes

Installing the replacement water filter in the MFT2976AEB01
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFT2976AEB01 filter questions

MFT2976AEB01 filter light will not turn off — what is the reset step?

The reset is a press-and-hold on the filter control with the cartridge in place; check the MFT2976AEB01 owner’s manual for where that control sits on your panel.

Can I run the Maytag MFT2976AEB01 with no cartridge installed?

No — the EDR2RXD2 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFT2976AEB01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

CartridgeOEM EDR2RXD2RECOMMENDEDEDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit
PriceOEM list$17.99
Verified fit✓ the bay cartridgeView & buy →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →