MFT2776FEZ
Exact-Fit Model Guide

Water Filter for the Maytag MFT2776FEZ (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFT2776FEZ replacement water filter cartridge
Replacement cartridge for this model
MFT2776FEZ · Quick Facts
TYPE
refrigerator
YEARS MADE
2016-2020
FILTER LOCATION
top-left of the fresh-food compartment in most French-door layouts, away from the door bins
FILTER SLOT
EveryDrop Filter 2 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
mft2776fez00
MFT2776FEZ · Quick Facts
Filter locationtop-left of the fresh-food compartment in most French-door layouts, away from the door bins
Filter slotEveryDrop Filter 2 bay
Replace everyEvery 6 months
Years made2016-2020
Also branded asmft2776fez00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

ClearFit CF-2008 EDR2RXD1 replacement filter 1-pack product photo
CF-2008

EDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit

$17.99

✓

Verified fit for MFT2776FEZ. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

MFT2776FEZ specifics — where the filter actually lives

On the MFT2776FEZ, the cartridge top-left of the fresh-food compartment in most French-door layouts, away from the door bins, the same estate every French-door refrigerator in this family uses. It is a twist-lock bay: one twist to release, one to lock; between them you are holding the entire service procedure.

Owners of the MFT2776FEZ report the same friction points: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. Decode the plate and the parts question answers itself: MFT on this badge family usually means French-door stock, which is why fit charts list cartridges by chassis code first. Finish letter sets like EZ never alter the bay; the EDR2RXD2 line fits the whole set.

MFT vs MSD — what the prefix tells you

Know your MFT from your MSD and the cartridge question halves: split by cabinet mission (French-door versus side-by-side), joined by cartridge line — that is the MFT/MSD story. Model years 2016-2020 — the manufacturer-stated window for the MFT2776FEZ, per the official efficiency listing.

Swap it in 5 minutes

Installing the replacement water filter in the MFT2776FEZ
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFT2776FEZ filter questions

Clearing the filter status light on a Maytag MFT2776FEZ?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the MFT2776FEZ manual’s filter section has the exact control for your trim.

Running the MFT2776FEZ with an empty filter bay — does it need a cap?

The bay self-seals: with no cartridge the MFT2776FEZ still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFT2776FEZ?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

CartridgeOEM EDR2RXD2RECOMMENDEDEDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit
PriceOEM list$17.99
Verified fit✓ the bay cartridgeView & buy →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →