Water Filter for the Whirlpool MFT2574DEM00 (EDR2RXD2)

Your Whirlpool refrigerator takes the EDR2RXD2 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFT2574DEM00 · Quick Facts

TYPE

refrigerator

YEARS MADE

2014-2018

FILTER LOCATION

in the fresh-food compartment, typically the upper back wall in most French-door layouts

FILTER SLOT

EveryDrop Filter 2 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

mft2574dem01, mft2574dem02

MFT2574DEM00 · Quick Facts

Filter locationin the fresh-food compartment, typically the upper back wall in most French-door layouts

Filter slotEveryDrop Filter 2 bay

Replace everyEvery 6 months

Years made2014-2018

Also branded asmft2574dem01, mft2574dem02

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MFT2574DEM00. Cross-checked against Whirlpool service documentation — this model family uses the EDR2RXD2 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MFT2574DEM00 specifics — where the filter actually lives

The filter bay on the MFT2574DEM00 in the fresh-food compartment, typically the upper back wall in most French-door layouts, a spot that survives trim changes across the MFT run. It is a twist-lock bay: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.

Order-day practicalities: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. Prefix literacy pays here: MFT on this badge family usually means French-door stock, which is why fit charts list cartridges by chassis code first. The -00 tail tracks the revision ladder — each rung shares the identical EDR2RXD2 bay.

MFT vs MSD — what the prefix tells you

The MFT/MSD pair divides this family by layout — French-door versus side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. Official listing data places the MFT2574DEM00 in 2014-2018 — useful, because cartridge revisions tend to track production windows.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFT2574DEM00 filter questions

Filter light reset on the Maytag MFT2574DEM00 — how?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the MFT2574DEM00 owner’s manual page for filter status.

Maytag MFT2574DEM00: bypass plug needed without a filter?

You can, but unfiltered — the EDR2RXD2 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR2RXD2 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFT2574DEM00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR2RXD2 cartridge

This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →