Water Filter for the Maytag MFI2568AEB (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFI2568AEB · Quick Facts

TYPE

refrigerator

YEARS MADE

2012-2016

FILTER LOCATION

top-left of the fresh-food compartment in most French-door layouts, away from the door bins

FILTER SLOT

EveryDrop Filter 4 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

MFI2568AEB · Quick Facts

Filter locationtop-left of the fresh-food compartment in most French-door layouts, away from the door bins

Filter slotEveryDrop Filter 4 bay

Replace everyEvery 6 months

Years made2012-2016

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MFI2568AEB. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MFI2568AEB specifics — where the filter actually lives

On the MFI2568AEB, the cartridge top-left of the fresh-food compartment in most French-door layouts, away from the door bins, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — one twist to release, one to lock; between them you are holding the entire service procedure.

Owners of the MFI2568AEB report the same friction points: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. The MFI in MFI2568AEB is doing real work: MFI typically codes for French-door machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. Trailing letters like EB denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

MFI vs MSD — what the prefix tells you

MFI versus MSD is the first fork in the parts catalog: French-door versus side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. Working from the model code, the MFI2568AEB lands somewhere around 2012-2016; treat the window as approximate.

Swap it in 5 minutes

Installing the water filter in the MFI2568AEB (EDR4RXD1 bay)

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFI2568AEB filter questions

How do I reset the filter light on the Maytag MFI2568AEB?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the MFI2568AEB manual’s filter-status page has the exact spot.

Does the Maytag MFI2568AEB need a bypass plug when the filter is out?

No bypass needed: the EDR4RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFI2568AEB?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →