Home › Refrigerator Water Filters › Whirlpool › MFI2269VEB1

MFI2269VEB1

Exact-Fit Model Guide

Water Filter for the Maytag MFI2269VEB1 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFI2269VEB1 replacement water filter cartridge — Replacement cartridge for this model

MFI2269VEB1 · Quick Facts

TYPE

refrigerator

YEARS MADE

2008-2012

FILTER LOCATION

high on the fresh-food side in most French-door layouts — upper back or left wall

FILTER SLOT

EveryDrop Filter 4 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

MFI2269VEB1 · Quick Facts

Filter locationhigh on the fresh-food side in most French-door layouts — upper back or left wall

Filter slotEveryDrop Filter 4 bay

Replace everyEvery 6 months

Years made2008-2012

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MFI2269VEB1. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MFI2269VEB1 specifics — where the filter actually lives

The MFI2269VEB1 carries its water filter high on the fresh-food side in most French-door layouts — upper back or left wall, a spot that survives trim changes across the MFI run. The seat is a twist-in design — the cartridge drops into the keyed seat and locks with a short quarter turn.

The small print owners learn the hard way: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The MFI prefix is the tell: it usually marks a French-door layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Trailing letters like B1 denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

MFI vs MSD — what the prefix tells you

The MFI prefix sits next to MSD in the catalog and the split is cabinet mission: French-door on the MFI side, side-by-side on the MSD side — the parts catalog runs the same cartridge across both. By model-code convention the MFI2269VEB1 falls around 2008 to 2012; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the MFI2269VEB1

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFI2269VEB1 filter questions

Clearing the filter status light on a Maytag MFI2269VEB1?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the MFI2269VEB1 owner’s manual page for filter status.

Maytag MFI2269VEB1: bypass plug needed without a filter?

The bay self-seals: with no cartridge the MFI2269VEB1 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFI2269VEB1?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →