Water Filter for the Maytag MFC2062VE (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

MFC2062VE · Quick Facts

TYPE

refrigerator

YEARS MADE

2008-2012

FILTER LOCATION

inside the fresh-food cavity, position varying with dispenser spec

FILTER SLOT

EveryDrop Filter 4 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

MFC2062VE · Quick Facts

Filter locationinside the fresh-food cavity, position varying with dispenser spec

Filter slotEveryDrop Filter 4 bay

Replace everyEvery 6 months

Years made2008-2012

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for MFC2062VE. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

MFC2062VE specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it inside the fresh-food cavity, position varying with dispenser spec, a deliberate placement that keeps the swap away from the door seals and drawer rails. This is a twist-style bay, the friendlier design: one twist to release, one to lock; between them you are holding the entire service procedure.

Owners of the MFC2062VE report the same friction points: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. The constant across every trim of this machine is the cartridge line — the EDR4RXD1 media line; that is the anchor every compatible listing hangs from. Trim code VE: cosmetic variants of one chassis, one cartridge family.

Reading the MFC2062VE model code — what the digits tell you

Working from the model code, the MFC2062VE lands somewhere around 2008-2012; treat the window as approximate. Fit listings tell the same story: the same EDR4RXD1 family covers this chassis end to end.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

MFC2062VE filter questions

Filter light reset on the Maytag MFC2062VE — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the MFC2062VE owner’s manual lists the button location for your control panel.

Can I run the Maytag MFC2062VE with no cartridge installed?

You can, but unfiltered — the EDR4RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Maytag refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my MFC2062VE?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →