Home › Refrigerator Water Filters › Whirlpool › KTRS22EMWH00
Water Filter for the KitchenAid KTRS22EMWH00 (EDR6D1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KTRS22EMWH00 specifics — where the filter actually lives
On the KTRS22EMWH00, the cartridge inside the fresh-food compartment — upper interior in most top-freezer layouts, the same estate every top-freezer refrigerator in this family uses. This is a twist-style bay, the friendlier design: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.
Two quirks worth knowing before you order: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. One prefix, one chassis family: it usually places the machine in the top-freezer family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. The two-digit 00 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.
KTR vs KSR — what the prefix tells you
The KTR/KSR pair divides this family by layout — KTR means top-freezer, KSR means side-by-side chassis. For filter shopping the distinction matters less than you would think — same line, different cabinet. Model-code reading puts the KTRS22EMWH00 at roughly 2003-2007 — treat that as approximately right, not a production guarantee.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KTRS22EMWH00 filter questions
Filter light reset on the KitchenAid KTRS22EMWH00 — how?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KTRS22EMWH00 manual’s filter-status page has the exact spot.
Can I run the KitchenAid KTRS22EMWH00 with no cartridge installed?
No cap needed — the EDR6D1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KTRS22EMWH00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →