Water Filter for the Whirlpool KTRP22EMWH04 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KTRP22EMWH04 · Quick Facts

TYPE

refrigerator

YEARS MADE

2003-2007

FILTER LOCATION

high in the fresh-food section in most top-freezer builds, near the controls

FILTER SLOT

EveryDrop Filter 6 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

ktrp22emwh00, ktrp22emwh01, ktrp22emwh02, ktrp22emwh03

KTRP22EMWH04 · Quick Facts

Filter locationhigh in the fresh-food section in most top-freezer builds, near the controls

Filter slotEveryDrop Filter 6 bay

Replace everyEvery 6 months

Years made2003-2007

Also branded asktrp22emwh00, ktrp22emwh01, ktrp22emwh02, ktrp22emwh03

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KTRP22EMWH04. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

KTRP22EMWH04 specifics — where the filter actually lives

Where the filter actually lives: high in the fresh-food section in most top-freezer builds, near the controls — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically it is a quarter-turn twist-in seat: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Two quirks worth knowing before you order: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. The KTR prefix is the tell: count on KTR to place this unit among top-freezer builds; that placement carries the water-path geometry with it. The 04 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

KTR vs KSR — what the prefix tells you

Two prefixes, two missions: top-freezer against side-by-side chassis, respectively. Filter bays rarely care — the media family carries over more often than not. Working from the model code, the KTRP22EMWH04 lands somewhere around 2003 to 2007; treat the window as approximate.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KTRP22EMWH04 filter questions

KitchenAid KTRP22EMWH04: how do I clear the change-filter light?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KTRP22EMWH04 manual’s filter-status page has the exact spot.

KitchenAid KTRP22EMWH04: bypass plug needed without a filter?

You can, but unfiltered — the EDR6D1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KTRP22EMWH04?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →