Home › Refrigerator Water Filters › Whirlpool › KTRC22EMWH04
Water Filter for the KitchenAid KTRC22EMWH04 (EDR6D1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana

Every cartridge that fits this model — pulled live from the catalogue:
✓
KTRC22EMWH04 specifics — where the filter actually lives
Where the filter actually lives: inside the fresh-food compartment — upper interior in most top-freezer layouts, a spot that survives trim changes across the KTR run. It is a twist-lock bay: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.
Before you click buy, two things: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. The KTR prefix is the tell: count on KTR to place this unit among top-freezer builds; that placement carries the water-path geometry with it. A -04 style suffix means running production revisions; filter fit stayed constant across the whole run.
KTR vs KSR — what the prefix tells you
The KTR prefix sits next to KSR in the catalog and the split is cabinet mission: The top-freezer/side-by-side chassis split tracks the KTR/KSR prefixes — cartridge fit follows the water path, not the label on the door. Catalog convention puts the KTRC22EMWH04 near 2003 to 2007 — an approximation, useful for bracketing the cartridge era only.
Swap it in 5 minutes

- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water

| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KTRC22EMWH04 filter questions
Clearing the filter status light on a KitchenAid KTRC22EMWH04?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KTRC22EMWH04 owner’s manual lists the button location for your control panel.
Will the KitchenAid KTRC22EMWH04 dispense water without a filter cartridge?
No bypass needed: the EDR6D1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KTRC22EMWH04?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →