HomeRefrigerator Water FiltersWhirlpoolKTRA19EMWH00

KTRA19EMWH00
Exact-Fit Model Guide

Water Filter for the Kenmore KTRA19EMWH00 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KTRA19EMWH00 replacement water filter cartridge
Replacement cartridge for this model
KTRA19EMWH00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2003-2007
FILTER LOCATION
upper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser
FILTER SLOT
EveryDrop Filter 6 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ktra19emwh01
KTRA19EMWH00 · Quick Facts
Filter locationupper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser
Filter slotEveryDrop Filter 6 bay
Replace everyEvery 6 months
Years made2003-2007
Also branded asktra19emwh01
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KTRA19EMWH00. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

KTRA19EMWH00 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it upper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser, a spot that survives trim changes across the KTR run. The seat is a twist-in design — the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Before you click buy, two things: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. The KTR in KTRA19EMWH00 is doing real work: it usually marks a top-freezer layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. That trailing 00 is the revision counter: KTR chassis revisions share one water path, so the cartridge order never changes with it.

KTR vs KSR — what the prefix tells you

Know your KTR from your KSR and the cartridge question halves: The top-freezer/side-by-side chassis split tracks the KTR/KSR prefixes — cartridge fit follows the water path, not the label on the door. Model-code reading puts the KTRA19EMWH00 at roughly 2003-2007 — treat that as approximately right, not a production guarantee.

Swap it in 5 minutes

Installing the replacement water filter in the KTRA19EMWH00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KTRA19EMWH00 filter questions

How do I reset the filter light on the Kenmore KTRA19EMWH00?

The reset is a press-and-hold on the filter control with the cartridge in place; check the KTRA19EMWH00 owner’s manual for where that control sits on your panel.

Kenmore KTRA19EMWH00: bypass plug needed without a filter?

Nothing to buy — the EDR6D1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KTRA19EMWH00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →