Water Filter for the Whirlpool KTRA19EMSS01
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KTRA19EMSS01 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it upper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser, the same estate every top-freezer refrigerator in this family uses. Mechanically the KTRA19EMSS01 uses a twist-in cartridge: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
Field notes: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The badge reads KTRA19EMSS01, but the chassis reads KTR: it usually places the machine in the top-freezer family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. Revision 01 changed trim details, not the water circuit; order with confidence by model stem.
KTR vs KSR — what the prefix tells you
Two prefixes, two missions: split by cabinet mission (top-freezer versus side-by-side chassis), joined by cartridge line — that is the KTR/KSR story. Working from the model code, the KTRA19EMSS01 lands somewhere around 2003 to 2007; treat the window as approximate.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
Filter light reset on the KitchenAid KTRA19EMSS01 — how?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KTRA19EMSS01 manual’s filter-status page has the exact spot.
Can I run the KitchenAid KTRA19EMSS01 with no cartridge installed?
No bypass needed: the EDR6D1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KTRA19EMSS01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| OEM EveryDrop EDR1RXD1 | RECOMMENDEDClearFit Standard CF-1001 | ClearFit Lead-Shield CF-1001P | |
|---|---|---|---|
| Price / filter | $59.99 | $14.99 | $19.99 |
| NSF 42 (chlorine, taste) | ✓ Certified | ✓ Certified | ✓ Certified |
| NSF 53 (lead, cysts) | ✓ Certified | — Not tested | ✓ 99.2% lead reduction |
| Capacity | 200 gal / 6 mo | 200 gal / 6 mo | 200 gal / 6 mo |
| Filter media | Carbon block | Coconut carbon | Carbon + ion-ex |
| Subscribe & Save | — | ✓ 15% off, cancel anytime | ✓ 15% off |
| Order | Not sold here — $59.99 at EveryDrop | Add to Cart | Add to Cart |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
Also due on this fridge
Second bay · Air filter slot
EveryDrop PAULTRA Air Filter ×2
Fits W10311524 · reduces food odors · replace every 6 months
$35.98
Bundle & save 10%
Full refresh kit — CF-1001 3-pack + PAULTRA ×2
Everything this fridge needs for the next 6 months, one shipment
$64.98
More models using this filter
LFCC22426S
Water Filter for Amana ABC2037DEB14 | Exact Fit EDR4RXD1 Replacement
Water Filter for Amana ABC2037DEW14 | Exact Fit EDR4RXD1 Replacement
Water Filter for Amana ABC2037DPS | Exact Fit EDR4RXD1 Replacement
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →