Home › Refrigerator Water Filters › Whirlpool › KTRA19EMBT00
Water Filter for the KitchenAid KTRA19EMBT00 (EDR6D1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KTRA19EMBT00 specifics — where the filter actually lives
On the KTRA19EMBT00, the cartridge upper back of the fresh-food compartment in most top-freezer layouts that carry a dispenser, the same estate every top-freezer refrigerator in this family uses. Mechanically the KTRA19EMBT00 uses a twist-in cartridge: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.
The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. Prefix literacy pays here: count on KTR to place this unit among top-freezer builds; that placement carries the water-path geometry with it. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
KTR vs KSR — what the prefix tells you
KTR versus KSR is the first fork in the parts catalog: split by cabinet mission (top-freezer versus side-by-side chassis), joined by cartridge line — that is the KTR/KSR story. Working from the model code, the KTRA19EMBT00 lands somewhere around 2003 to 2007; treat the window as approximate.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KTRA19EMBT00 filter questions
KitchenAid KTRA19EMBT00: how do I clear the change-filter light?
The reset is a press-and-hold on the filter control with the cartridge in place; check the KTRA19EMBT00 owner’s manual for where that control sits on your panel.
Is a bypass plug required for the KTRA19EMBT00 when the cartridge is removed?
The bay self-seals: with no cartridge the KTRA19EMBT00 still dispenses, just unfiltered. No bypass plug exists for this line.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KTRA19EMBT00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →