Home › Refrigerator Water Filters › Whirlpool › KSSS48FJW00
Water Filter for the KitchenAid KSSS48FJW00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSSS48FJW00 specifics — where the filter actually lives
Where the filter actually lives: in the lower fresh-food zone in most side-by-side layouts, knee height or below, a spot that survives trim changes across the KSS run. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
Order-day practicalities: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. One prefix, one chassis family: the KSS tag is how the catalog sorts side-by-side machines — carry it into any fit checker and the right cartridge line follows. The two-digit 00 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.
KSS vs the rest of the catalog — what the prefix tells you
KSS or the rest of the catalog: the badge difference that does (and does not) change the filter order. The door count differs — side-by-side against the neighboring layout — but the bay and the cartridge order do not. The KSSS48FJW00 decodes to about 2000 to 2004 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSSS48FJW00 filter questions
KSSS48FJW00 filter light will not turn off — what is the reset step?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSSS48FJW00 owner’s manual lists the button location for your control panel.
Is a bypass plug required for the KSSS48FJW00 when the cartridge is removed?
No — the EDR5RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSSS48FJW00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →