HomeRefrigerator Water FiltersWhirlpoolKSSS42QJT00

KSSS42QJT00
Exact-Fit Model Guide

Water Filter for the Kenmore KSSS42QJT00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSSS42QJT00 replacement water filter cartridge
Replacement cartridge for this model
KSSS42QJT00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2000-2004
FILTER LOCATION
behind the lower fresh-food trim or base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KSSS42QJT00 · Quick Facts
Filter locationbehind the lower fresh-food trim or base grille in most side-by-side layouts
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2000-2004
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSSS42QJT00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSSS42QJT00 specifics — where the filter actually lives

On the KSSS42QJT00, the cartridge behind the lower fresh-food trim or base grille in most side-by-side layouts, a spot that survives trim changes across the KSS run. Mechanically the KSSS42QJT00 uses a twist-in cartridge: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Practical notes from the install forums: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. Decode the plate and the parts question answers itself: KSS on this badge family usually means side-by-side stock, which is why fit charts list cartridges by chassis code first. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.

KSS vs the rest of the catalog — what the prefix tells you

KSS or the rest of the catalog: the badge difference that does (and does not) change the filter order. KSS covers side-by-side, while the rest of the catalog covers the neighboring layout. The cartridge line is usually shared across both — order by chassis, not by door count. By model-code convention the KSSS42QJT00 falls around 2000 to 2004; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSSS42QJT00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSSS42QJT00 filter questions

Reset procedure for the change-filter alert on the KSSS42QJT00?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KSSS42QJT00 manual documents the button for each panel variant.

Does the Kenmore KSSS42QJT00 need a bypass plug when the filter is out?

The bay self-seals: with no cartridge the KSSS42QJT00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSSS42QJT00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →