Home › Refrigerator Water Filters › Whirlpool › KSSS36QKX00
Water Filter for the KitchenAid KSSS36QKX00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSSS36QKX00 specifics — where the filter actually lives
Where the filter actually lives: low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every side-by-side refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Practical notes from the install forums: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. One prefix, one chassis family: count on KSS to place this unit among side-by-side builds; that placement carries the water-path geometry with it. Suffix 00 = production revision; filtration hardware was not part of the revision cycle.
KSS vs the rest of the catalog — what the prefix tells you
The catalog pairs KSS with the rest of the catalog, and the split matters at order time: split by cabinet mission (side-by-side versus the neighboring layout), joined by cartridge line — that is the KSS/the rest of the catalog story. By model-code convention the KSSS36QKX00 falls around 2001 to 2005; treat the dates as a working estimate, not record.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSSS36QKX00 filter questions
How to reset the water filter indicator: KitchenAid KSSS36QKX00?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KSSS36QKX00 manual’s filter section has the exact control for your trim.
Does the KitchenAid KSSS36QKX00 need a bypass plug when the filter is out?
No — the EDR5RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSSS36QKX00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →