Home › Refrigerator Water Filters › Whirlpool › KSSC48FKB00
Water Filter for the KitchenAid KSSC48FKB00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSSC48FKB00 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it in the lower fresh-food zone in most side-by-side layouts, knee height or below, the same estate every side-by-side refrigerator in this family uses. The seat is a twist-in design — align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.
Field notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The KSS in KSSC48FKB00 is doing real work: KSS generally indicates the side-by-side family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. Read the 00 ending as a revision marker — KitchenAid used it for running changes, none of which touched the EDR5RXD1 bay.
KSS vs the rest of the catalog — what the prefix tells you
Prefix families here: KSS against the rest of the catalog. KSS machines are side-by-side; the rest of the catalog machines are the neighboring layout. Both draw from the same cartridge line, which is why fit charts list them together. The KSSC48FKB00 decodes to about 2001-2005 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSSC48FKB00 filter questions
Clearing the filter status light on a KitchenAid KSSC48FKB00?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KSSC48FKB00 owner’s manual page for filter status.
Running the KSSC48FKB00 with an empty filter bay — does it need a cap?
No cap needed — the EDR5RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSSC48FKB00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →