Home › Refrigerator Water Filters › Whirlpool › KSSC48FJT00
Water Filter for the KitchenAid KSSC48FJT00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSSC48FJT00 specifics — where the filter actually lives
Where the filter actually lives: behind the lower fresh-food trim or base grille in most side-by-side layouts, the same estate every side-by-side refrigerator in this family uses. This is a twist-style bay, the friendlier design: the cartridge drops into the keyed seat and locks with a short quarter turn.
Before you click buy, two things: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. KSS reads as a chassis statement rather than a trim code: in this catalog KSS is the side-by-side marker; internal layouts vary, the bay layout does not. That trailing 00 is the revision counter: KSS chassis revisions share one water path, so the cartridge order never changes with it.
KSS vs the rest of the catalog — what the prefix tells you
The KSS/the rest of the catalog pair divides this family by layout — KSS answers to side-by-side; the rest of the catalog answers to the neighboring layout; the water-filter answer is shared. The KSSC48FJT00 decodes to about 2000 to 2004 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSSC48FJT00 filter questions
Reset procedure for the change-filter alert on the KSSC48FJT00?
The reset is a press-and-hold on the filter control with the cartridge in place; check the KSSC48FJT00 owner’s manual for where that control sits on your panel.
Running the KSSC48FJT00 with an empty filter bay — does it need a cap?
You can, but unfiltered — the EDR5RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSSC48FJT00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →