Home › Refrigerator Water Filters › Whirlpool › KSRU25CRWH00
Water Filter for the KitchenAid KSRU25CRWH00 (EDR3RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRU25CRWH00 specifics — where the filter actually lives
On the KSRU25CRWH00, the cartridge bottom of the fresh-food column or at the grille line in most side-by-side builds, a spot that survives trim changes across the KSR run. The seat is a twist-in design — align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.
The recurring owner notes: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Prefix literacy pays here: KSR typically codes for side-by-side chassis machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.
KSR vs KTR — what the prefix tells you
KSR or KTR: the badge difference that does (and does not) change the filter order. Chassis first: side-by-side chassis (KSR) versus top-freezer (KTR). The shared cartridge line covers both without adaptation. The KSRU25CRWH00 code suggests roughly 2005 to 2009 production — approximately right, which is all a parts search needs.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRU25CRWH00 filter questions
KSRU25CRWH00 filter light will not turn off — what is the reset step?
Lock in the new cartridge first, then hold the reset control for a few seconds — the KSRU25CRWH00 manual documents the button for each panel variant.
Is a bypass plug required for the KSRU25CRWH00 when the cartridge is removed?
No bypass needed: the EDR3RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR3RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRU25CRWH00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR3RXD1 | RECOMMENDEDEDR3RXD1 Replacement Water Filter · 1-Pack – ClearFit | EDR3RXD1 Replacement Water Filter · 3-Pack – ClearFit | EDR3RXD1 Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $17.99 | $44.97 | $80.94 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →