Home › Refrigerator Water Filters › Whirlpool › KSRS25PNSS00
Water Filter for the Kenmore KSRS25PNSS00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRS25PNSS00 specifics — where the filter actually lives
The filter bay on the KSRS25PNSS00 bottom of the fresh-food column or at the grille line in most side-by-side builds, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the KSRS25PNSS00 uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Two quirks worth knowing before you order: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. One prefix, one chassis family: it usually marks a side-by-side chassis layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. The two-digit 00 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.
KSR vs KTR — what the prefix tells you
KSR or KTR: the badge difference that does (and does not) change the filter order. KSR covers side-by-side chassis, while KTR covers top-freezer. The cartridge line is usually shared across both — order by chassis, not by door count. The constant across every trim of this machine is the cartridge line — this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the Kenmore catalog.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRS25PNSS00 filter questions
Filter light reset on the Kenmore KSRS25PNSS00 — how?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSRS25PNSS00 owner’s manual lists the button location for your control panel.
Is a bypass plug required for the KSRS25PNSS00 when the cartridge is removed?
No bypass needed: the EDR5RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a Kenmore refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRS25PNSS00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →