Water Filter for the Whirlpool KSRS25IKBU00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRS25IKBU00 · Quick Facts

TYPE

refrigerator

YEARS MADE

2001-2005

FILTER LOCATION

bottom of the fresh-food column or at the grille line in most side-by-side builds

FILTER SLOT

EveryDrop Filter 5 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

KSRS25IKBU00 · Quick Facts

Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds

Filter slotEveryDrop Filter 5 bay

Replace everyEvery 6 months

Years made2001-2005

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSRS25IKBU00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

KSRS25IKBU00 specifics — where the filter actually lives

Where the filter actually lives: bottom of the fresh-food column or at the grille line in most side-by-side builds, so expect to clear one shelf edge before you have working room. It is a twist-lock bay: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.

Field notes: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The KSR in KSRS25IKBU00 is doing real work: the KSR tag is how the catalog sorts side-by-side chassis machines — carry it into any fit checker and the right cartridge line follows. The two-digit 00 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.

KSR vs KTR — what the prefix tells you

Catalog shorthand: KSR covers side-by-side chassis, while KTR covers top-freezer. The cartridge line is usually shared across both — order by chassis, not by door count. The KSRS25IKBU00 decodes to about 2001 to 2005 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRS25IKBU00 filter questions

Filter light reset on the KitchenAid KSRS25IKBU00 — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSRS25IKBU00 owner’s manual lists the button location for your control panel.

Does the KitchenAid KSRS25IKBU00 need a bypass plug when the filter is out?

No bypass needed: the EDR5RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRS25IKBU00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →