Home › Refrigerator Water Filters › Whirlpool › KSRS22FGBL02

KSRS22FGBL02
Exact-Fit Model Guide

Water Filter for the KitchenAid KSRS22FGBL02 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRS22FGBL02 replacement water filter cartridge
Replacement cartridge for this model
KSRS22FGBL02 · Quick Facts
TYPE
refrigerator
YEARS MADE
2017-2021
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrs22fgbl00, ksrs22fgbl04
KSRS22FGBL02 · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2017-2021
Also branded asksrs22fgbl00, ksrs22fgbl04
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSRS22FGBL02. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRS22FGBL02 specifics — where the filter actually lives

The KSRS22FGBL02 carries its water filter low on the fresh-food side or behind the base grille in most side-by-side layouts — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Field notes: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. One prefix, one chassis family: KSR on this badge family usually means side-by-side chassis stock, which is why fit charts list cartridges by chassis code first. The 02 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

KSR vs KTR — what the prefix tells you

KSR or KTR: the badge difference that does (and does not) change the filter order. The door count differs — side-by-side chassis against top-freezer — but the bay and the cartridge order do not. Catalog convention puts the KSRS22FGBL02 near 2017-2021 — an approximation, useful for bracketing the cartridge era only.

Swap it in 5 minutes

Installing the replacement water filter in the KSRS22FGBL02
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRS22FGBL02 filter questions

How do I reset the filter light on the KitchenAid KSRS22FGBL02?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KSRS22FGBL02 manual documents the button for each panel variant.

Is a bypass plug required for the KSRS22FGBL02 when the cartridge is removed?

You can, but unfiltered — the EDR5RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRS22FGBL02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →