HomeRefrigerator Water FiltersWhirlpoolKSRP25FSBL00

KSRP25FSBL00
Exact-Fit Model Guide

Water Filter for the Kenmore KSRP25FSBL00 (EDR3RXD1)

Your Whirlpool refrigerator takes the EDR3RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRP25FSBL00 replacement water filter cartridge
Replacement cartridge for this model
KSRP25FSBL00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2006-2010
FILTER LOCATION
behind the lower fresh-food trim or base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 3 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrp25fsbl01
KSRP25FSBL00 · Quick Facts
Filter locationbehind the lower fresh-food trim or base grille in most side-by-side layouts
Filter slotEveryDrop Filter 3 bay
Replace everyEvery 6 months
Years made2006-2010
Also branded asksrp25fsbl01
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRP25FSBL00. Cross-checked against Whirlpool service documentation — this model family uses the EDR3RXD1 bay with no chip or bypass restrictions.

KSRP25FSBL00 specifics — where the filter actually lives

The filter bay on the KSRP25FSBL00 behind the lower fresh-food trim or base grille in most side-by-side layouts, a spot that survives trim changes across the KSR run. Mechanically the KSRP25FSBL00 uses a twist-in cartridge: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Owners of the KSRP25FSBL00 report the same friction points: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The badge reads KSRP25FSBL00, but the chassis reads KSR: in this catalog KSR is the side-by-side chassis marker; internal layouts vary, the bay layout does not. Suffix 00 = production revision; filtration hardware was not part of the revision cycle.

KSR vs KTR — what the prefix tells you

KSR versus KTR is the first fork in the parts catalog: The side-by-side chassis/top-freezer split tracks the KSR/KTR prefixes — cartridge fit follows the water path, not the label on the door. By model-code convention the KSRP25FSBL00 falls around 2006 to 2010; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSRP25FSBL00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRP25FSBL00 filter questions

KSRP25FSBL00 filter light will not turn off — what is the reset step?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KSRP25FSBL00 manual documents the button for each panel variant.

Does the Kenmore KSRP25FSBL00 need a bypass plug when the filter is out?

No cap needed — the EDR3RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR3RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRP25FSBL00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR3RXD1 cartridge

This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →