HomeRefrigerator Water FiltersWhirlpoolKSRN25FRSS01

KSRN25FRSS01
Exact-Fit Model Guide

Water Filter for the Kenmore KSRN25FRSS01 (EDR3RXD1)

Your Whirlpool refrigerator takes the EDR3RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRN25FRSS01 replacement water filter cartridge
Replacement cartridge for this model
KSRN25FRSS01 · Quick Facts
TYPE
refrigerator
YEARS MADE
2005-2009
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 3 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrn25frss00
KSRN25FRSS01 · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotEveryDrop Filter 3 bay
Replace everyEvery 6 months
Years made2005-2009
Also branded asksrn25frss00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRN25FRSS01. Cross-checked against Whirlpool service documentation — this model family uses the EDR3RXD1 bay with no chip or bypass restrictions.

KSRN25FRSS01 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, a spot that survives trim changes across the KSR run. This is a twist-style bay, the friendlier design: one twist to release, one to lock; between them you are holding the entire service procedure.

The recurring owner notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The KSR prefix is the tell: KSR on this badge family usually means side-by-side chassis stock, which is why fit charts list cartridges by chassis code first. Suffix 01 = production revision; filtration hardware was not part of the revision cycle.

KSR vs KTR — what the prefix tells you

Catalog shorthand: side-by-side chassis against top-freezer, respectively. Filter bays rarely care — the media family carries over more often than not. By model-code convention the KSRN25FRSS01 falls around 2005-2009; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSRN25FRSS01
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRN25FRSS01 filter questions

KSRN25FRSS01 filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the KSRN25FRSS01 manual maps the control by panel type.

KSRN25FRSS01 with no water filter installed — safe, or does it need a bypass?

No cap needed — the EDR3RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR3RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRN25FRSS01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR3RXD1 cartridge

This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →