Home › Refrigerator Water Filters › Whirlpool › KSRL25FRWH01
Water Filter for the Kenmore KSRL25FRWH01 (EDR3RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRL25FRWH01 specifics — where the filter actually lives
The filter bay on the KSRL25FRWH01 behind the lower fresh-food trim or base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. Mechanically the KSRL25FRWH01 uses a twist-in cartridge: one twist to release, one to lock; between them you are holding the entire service procedure.
Field notes: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. Prefix literacy pays here: KSR generally indicates the side-by-side chassis family, so cross-referencing cartridges by chassis rather than by door style usually keeps you out of the wrong-parts queue. Read the 01 ending as a revision marker — Kenmore used it for running changes, none of which touched the EDR3RXD1 bay.
KSR vs KTR — what the prefix tells you
Two prefixes, two missions: side-by-side chassis versus top-freezer. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. By model-code convention the KSRL25FRWH01 falls around 2005 to 2009; treat the dates as a working estimate, not record.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRL25FRWH01 filter questions
How do I reset the filter light on the Kenmore KSRL25FRWH01?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KSRL25FRWH01 manual’s filter section has the exact control for your trim.
Can I run the Kenmore KSRL25FRWH01 with no cartridge installed?
No cap needed — the EDR3RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a Kenmore refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR3RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRL25FRWH01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →