Home › Refrigerator Water Filters › Whirlpool › KSRL25FRSS00
Water Filter for the Kenmore KSRL25FRSS00 (EDR3RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRL25FRSS00 specifics — where the filter actually lives
On the KSRL25FRSS00, the cartridge at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the KSRL25FRSS00 uses a twist-in cartridge: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.
The recurring owner notes: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. The KSR prefix is the tell: KSR typically codes for side-by-side chassis machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
KSR vs KTR — what the prefix tells you
KSR or KTR: the badge difference that does (and does not) change the filter order. side-by-side chassis versus top-freezer. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. Working from the model code, the KSRL25FRSS00 lands somewhere around 2005 to 2009; treat the window as approximate.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRL25FRSS00 filter questions
How do I reset the filter light on the Kenmore KSRL25FRSS00?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KSRL25FRSS00 owner’s manual page for filter status.
Does the Kenmore KSRL25FRSS00 need a bypass plug when the filter is out?
You can, but unfiltered — the EDR3RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Kenmore refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR3RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRL25FRSS00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →