Water Filter for the Kenmore KSRL25FRBL00 (EDR3RXD1)

Your Whirlpool refrigerator takes the EDR3RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRL25FRBL00 · Quick Facts

TYPE

refrigerator

YEARS MADE

2005-2009

FILTER LOCATION

low on the fresh-food side or behind the base grille in most side-by-side layouts

FILTER SLOT

EveryDrop Filter 3 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

ksrl25frbl01

KSRL25FRBL00 · Quick Facts

Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts

Filter slotEveryDrop Filter 3 bay

Replace everyEvery 6 months

Years made2005-2009

Also branded asksrl25frbl01

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSRL25FRBL00. Cross-checked against Whirlpool service documentation — this model family uses the EDR3RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

KSRL25FRBL00 specifics — where the filter actually lives

The KSRL25FRBL00 carries its water filter low on the fresh-food side or behind the base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Before you click buy, two things: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The KSR in KSRL25FRBL00 is doing real work: KSR on this badge family usually means side-by-side chassis stock, which is why fit charts list cartridges by chassis code first. That trailing 00 is the revision counter: KSR chassis revisions share one water path, so the cartridge order never changes with it.

KSR vs KTR — what the prefix tells you

Two prefixes, two missions: KSR means side-by-side chassis, KTR means top-freezer. For filter shopping the distinction matters less than you would think — same line, different cabinet. By model-code convention the KSRL25FRBL00 falls around 2005 to 2009; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRL25FRBL00 filter questions

Clearing the filter status light on a Kenmore KSRL25FRBL00?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KSRL25FRBL00 manual’s filter-status page has the exact spot.

Can I run the Kenmore KSRL25FRBL00 with no cartridge installed?

Nothing to buy — the EDR3RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR3RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRL25FRBL00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR3RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR3RXD1 cartridge

This bay takes the OEM EDR3RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →