HomeRefrigerator Water FiltersWhirlpoolKSRJ25CNBT00

KSRJ25CNBT00
Exact-Fit Model Guide

Water Filter for the Kenmore KSRJ25CNBT00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRJ25CNBT00 replacement water filter cartridge
Replacement cartridge for this model
KSRJ25CNBT00 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KSRJ25CNBT00 · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRJ25CNBT00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRJ25CNBT00 specifics — where the filter actually lives

The filter bay on the KSRJ25CNBT00 low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every side-by-side chassis refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Owners of the KSRJ25CNBT00 report the same friction points: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. KSR reads as a chassis statement rather than a trim code: it usually marks a side-by-side chassis layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Revision 00 changed trim details, not the water circuit; order with confidence by model stem.

KSR vs KTR — what the prefix tells you

Two prefixes, two missions: KSR answers to side-by-side chassis; KTR answers to top-freezer; the water-filter answer is shared. Whatever the badge on the door says, the parts reality is the EDR5RXD1 media line; that is the anchor every compatible listing hangs from.

Swap it in 5 minutes

Installing the replacement water filter in the KSRJ25CNBT00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRJ25CNBT00 filter questions

Filter light reset on the Kenmore KSRJ25CNBT00 — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSRJ25CNBT00 owner’s manual lists the button location for your control panel.

Is a bypass plug required for the KSRJ25CNBT00 when the cartridge is removed?

No cap needed — the EDR5RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRJ25CNBT00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →