Home › Refrigerator Water Filters › Whirlpool › KSRJ22CNBT00
Water Filter for the KitchenAid KSRJ22CNBT00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRJ22CNBT00 specifics — where the filter actually lives
The filter bay on the KSRJ22CNBT00 in the lower fresh-food zone in most side-by-side layouts, knee height or below — usually a kneeling-height or shoulder-height swap, not a teardown. This is a twist-style bay, the friendlier design: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.
The recurring owner notes: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. The badge reads KSRJ22CNBT00, but the chassis reads KSR: it usually marks a side-by-side chassis layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Revision 00 changed trim details, not the water circuit; order with confidence by model stem.
KSR vs KTR — what the prefix tells you
Two prefixes, two missions: The door count differs — side-by-side chassis against top-freezer — but the bay and the cartridge order do not. Whatever the badge on the door says, the parts reality is this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the KitchenAid catalog.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRJ22CNBT00 filter questions
Clearing the filter status light on a KitchenAid KSRJ22CNBT00?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KSRJ22CNBT00 manual’s filter section has the exact control for your trim.
KitchenAid KSRJ22CNBT00: bypass plug needed without a filter?
The bay self-seals: with no cartridge the KSRJ22CNBT00 still dispenses, just unfiltered. No bypass plug exists for this line.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRJ22CNBT00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →