HomeRefrigerator Water FiltersWhirlpoolKSRI25FNST00

KSRI25FNST00
Exact-Fit Model Guide

Water Filter for the Kenmore KSRI25FNST00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRI25FNST00 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KSRI25FNST00 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRI25FNST00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRI25FNST00 specifics — where the filter actually lives

The filter bay on the KSRI25FNST00 at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, so expect to clear one shelf edge before you have working room. It is a twist-lock bay: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Field notes: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. Read the prefix and the maintenance writes itself: generally a side-by-side chassis machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.

KSR vs KTR — what the prefix tells you

KSR versus KTR is the first fork in the parts catalog: Ordering by prefix works because KSR means side-by-side chassis and KTR means top-freezer in this catalog — and the cartridge pool overlaps both. What pins the parts choice down is the media line: the KSRI25FNST00 shares its water path with the whole EDR5RXD1 generation — the cartridge is the common denominator, not the door count.

Swap it in 5 minutes

  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRI25FNST00 filter questions

How do I reset the filter light on the Kenmore KSRI25FNST00?

The reset is a press-and-hold on the filter control with the cartridge in place; check the KSRI25FNST00 owner’s manual for where that control sits on your panel.

Kenmore KSRI25FNST00: bypass plug needed without a filter?

No — the EDR5RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRI25FNST00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →