Water Filter for the Whirlpool KSRG22FKBT15
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRG22FKBT15 specifics — where the filter actually lives
Where the filter actually lives: behind the lower fresh-food trim or base grille in most side-by-side layouts, a spot that survives trim changes across the KSR run. Mechanically the KSRG22FKBT15 uses a twist-in cartridge: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.
Two quirks worth knowing before you order: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. KSR reads as a chassis statement rather than a trim code: count on KSR to place this unit among side-by-side chassis builds; that placement carries the water-path geometry with it. The -15 tail tracks the revision ladder — each rung shares the identical EDR5RXD1 bay.
KSR vs KTR — what the prefix tells you
The KSR/KTR pair divides this family by layout — KSR covers side-by-side chassis, while KTR covers top-freezer. The cartridge line is usually shared across both — order by chassis, not by door count. Model-code reading puts the KSRG22FKBT15 at roughly 2001 to 2005 — treat that as approximately right, not a production guarantee.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
Filter light reset on the KitchenAid KSRG22FKBT15 — how?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KSRG22FKBT15 owner’s manual page for filter status.
KitchenAid KSRG22FKBT15: bypass plug needed without a filter?
You can, but unfiltered — the EDR5RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRG22FKBT15?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| OEM EveryDrop EDR1RXD1 | RECOMMENDEDClearFit Standard CF-1001 | ClearFit Lead-Shield CF-1001P | |
|---|---|---|---|
| Price / filter | $59.99 | $14.99 | $19.99 |
| NSF 42 (chlorine, taste) | ✓ Certified | ✓ Certified | ✓ Certified |
| NSF 53 (lead, cysts) | ✓ Certified | — Not tested | ✓ 99.2% lead reduction |
| Capacity | 200 gal / 6 mo | 200 gal / 6 mo | 200 gal / 6 mo |
| Filter media | Carbon block | Coconut carbon | Carbon + ion-ex |
| Subscribe & Save | — | ✓ 15% off, cancel anytime | ✓ 15% off |
| Order | Not sold here — $59.99 at EveryDrop | Add to Cart | Add to Cart |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
Also due on this fridge
Second bay · Air filter slot
EveryDrop PAULTRA Air Filter ×2
Fits W10311524 · reduces food odors · replace every 6 months
$35.98
Bundle & save 10%
Full refresh kit — CF-1001 3-pack + PAULTRA ×2
Everything this fridge needs for the next 6 months, one shipment
$64.98
More models using this filter
FFHS2313LSB
FFHS2622MB3
FPSC2278UF8
FRS6LF7FW0
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →