HomeRefrigerator Water FiltersWhirlpoolKSRB27FHBL00

KSRB27FHBL00
Exact-Fit Model Guide

Water Filter for the Kenmore KSRB27FHBL00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRB27FHBL00 replacement water filter cartridge
Replacement cartridge for this model
KSRB27FHBL00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2018-2022
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ksrb27fhbl03
KSRB27FHBL00 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2018-2022
Also branded asksrb27fhbl03
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSRB27FHBL00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRB27FHBL00 specifics — where the filter actually lives

On the KSRB27FHBL00, the cartridge at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a spot that survives trim changes across the KSR run. This is a twist-style bay, the friendlier design: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Field notes: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Prefix literacy pays here: the KSR tag is how the catalog sorts side-by-side chassis machines — carry it into any fit checker and the right cartridge line follows. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.

KSR vs KTR — what the prefix tells you

Prefix families here: KSR against KTR. side-by-side chassis on the KSR side, top-freezer on the KTR side — the parts catalog runs the same cartridge across both. By model-code convention the KSRB27FHBL00 falls around 2018 to 2022; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSRB27FHBL00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRB27FHBL00 filter questions

How to reset the water filter indicator: Kenmore KSRB27FHBL00?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KSRB27FHBL00 owner’s manual lists the button location for your control panel.

Will the Kenmore KSRB27FHBL00 dispense water without a filter cartridge?

You can, but unfiltered — the EDR5RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRB27FHBL00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →