Home › Refrigerator Water Filters › Whirlpool › KSRB25FNSS00
Water Filter for the KitchenAid KSRB25FNSS00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRB25FNSS00 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a spot that survives trim changes across the KSR run. Mechanically the KSRB25FNSS00 uses a twist-in cartridge: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
Two quirks worth knowing before you order: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. Read the prefix and the maintenance writes itself: KSR typically codes for side-by-side chassis machines in this catalog, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. That trailing 00 is the revision counter: KSR chassis revisions share one water path, so the cartridge order never changes with it.
KSR vs KTR — what the prefix tells you
Know your KSR from your KTR and the cartridge question halves: KSR means side-by-side chassis, KTR means top-freezer. For filter shopping the distinction matters less than you would think — same line, different cabinet. Under the cabinet differences one thing holds: the KSRB25FNSS00 shares its water path with the whole EDR5RXD1 generation — the cartridge is the common denominator, not the door count.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRB25FNSS00 filter questions
Reset procedure for the change-filter alert on the KSRB25FNSS00?
The reset is a press-and-hold on the filter control with the cartridge in place; check the KSRB25FNSS00 owner’s manual for where that control sits on your panel.
Can I run the KitchenAid KSRB25FNSS00 with no cartridge installed?
You can, but unfiltered — the EDR5RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRB25FNSS00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →