Home › Refrigerator Water Filters › Whirlpool › KSRB25FGWH00

KSRB25FGWH00
Exact-Fit Model Guide

Water Filter for the KitchenAid KSRB25FGWH00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSRB25FGWH00 replacement water filter cartridge
Replacement cartridge for this model
KSRB25FGWH00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2017-2021
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
KSRB25FGWH00 · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2017-2021
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KSRB25FGWH00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSRB25FGWH00 specifics — where the filter actually lives

The filter bay on the KSRB25FGWH00 bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every side-by-side chassis refrigerator in this family uses. This is a twist-style bay, the friendlier design: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Owners of the KSRB25FGWH00 report the same friction points: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. Prefix literacy pays here: the KSR tag is how the catalog sorts side-by-side chassis machines — carry it into any fit checker and the right cartridge line follows. The -00 tail tracks the revision ladder — each rung shares the identical EDR5RXD1 bay.

KSR vs KTR — what the prefix tells you

The KSR prefix sits next to KTR in the catalog and the split is cabinet mission: The side-by-side chassis/top-freezer split tracks the KSR/KTR prefixes — cartridge fit follows the water path, not the label on the door. By model-code convention the KSRB25FGWH00 falls around 2017 to 2021; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KSRB25FGWH00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSRB25FGWH00 filter questions

KitchenAid KSRB25FGWH00: how do I clear the change-filter light?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the KSRB25FGWH00 manual maps the control by panel type.

Can I run the KitchenAid KSRB25FGWH00 with no cartridge installed?

The bay self-seals: with no cartridge the KSRB25FGWH00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSRB25FGWH00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →