Home › Refrigerator Water Filters › Whirlpool › KSRA22CNBL00
Water Filter for the KitchenAid KSRA22CNBL00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KSRA22CNBL00 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically the KSRA22CNBL00 uses a twist-in cartridge: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.
The recurring owner notes: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. Read the prefix and the maintenance writes itself: the KSR tag is how the catalog sorts side-by-side chassis machines — carry it into any fit checker and the right cartridge line follows. That trailing 00 is the revision counter: KSR chassis revisions share one water path, so the cartridge order never changes with it.
KSR vs KTR — what the prefix tells you
The catalog pairs KSR with KTR, and the split matters at order time: side-by-side chassis on the KSR side, top-freezer on the KTR side — the parts catalog runs the same cartridge across both. Under the cabinet differences one thing holds: this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the KitchenAid catalog.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KSRA22CNBL00 filter questions
How do I reset the filter light on the KitchenAid KSRA22CNBL00?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KSRA22CNBL00 manual’s filter section has the exact control for your trim.
Is a bypass plug required for the KSRA22CNBL00 when the cartridge is removed?
No cap needed — the EDR5RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KSRA22CNBL00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →