HomeRefrigerator Water FiltersWhirlpoolKSFS25FJWH00

KSFS25FJWH00
Exact-Fit Model Guide

Water Filter for the KitchenAid KSFS25FJWH00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSFS25FJWH00 replacement water filter cartridge
Replacement cartridge for this model
KSFS25FJWH00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2000-2004
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KSFS25FJWH00 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2000-2004
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSFS25FJWH00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSFS25FJWH00 specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. This is a twist-style bay, the friendlier design: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Practical notes from the install forums: expect the first swap to take longer than the box suggests — aged o-rings grip — so budget ten minutes, not five. What pins the parts choice down is the media line: the EDR5RXD1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. Read the 00 ending as a revision marker — KitchenAid used it for running changes, none of which touched the EDR5RXD1 bay.

Reading the KSFS25FJWH00 model code — what the digits tell you

The KSFS25FJWH00 code suggests roughly 2000 to 2004 production — approximately right, which is all a parts search needs. Filter logic on this chassis: trim codes shuffle doors and finishes; the EDR5RXD1 cartridge family is the fixed point.

Swap it in 5 minutes

Installing the replacement water filter in the KSFS25FJWH00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSFS25FJWH00 filter questions

Clearing the filter status light on a KitchenAid KSFS25FJWH00?

The reset is a press-and-hold on the filter control with the cartridge in place; check the KSFS25FJWH00 owner’s manual for where that control sits on your panel.

Does the KitchenAid KSFS25FJWH00 need a bypass plug when the filter is out?

The bay self-seals: with no cartridge the KSFS25FJWH00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSFS25FJWH00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →