HomeRefrigerator Water FiltersWhirlpoolKSCS25FKWH01

KSCS25FKWH01
Exact-Fit Model Guide

Water Filter for the Kenmore KSCS25FKWH01 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KSCS25FKWH01 replacement water filter cartridge
Replacement cartridge for this model
KSCS25FKWH01 · Quick Facts
TYPE
refrigerator
YEARS MADE
2001-2005
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KSCS25FKWH01 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2001-2005
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KSCS25FKWH01. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KSCS25FKWH01 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a spot that survives trim changes across the KSC run. Mechanically it is a quarter-turn twist-in seat: the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Practical notes from the install forums: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. The badge reads KSCS25FKWH01, but the chassis reads KSC: generally a side-by-side variant machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. The -01 tail tracks the revision ladder — each rung shares the identical EDR5RXD1 bay.

KSC vs KSR — what the prefix tells you

Know your KSC from your KSR and the cartridge question halves: The side-by-side variant/side-by-side chassis split tracks the KSC/KSR prefixes — cartridge fit follows the water path, not the label on the door. Working from the model code, the KSCS25FKWH01 lands somewhere around 2001-2005; treat the window as approximate.

Swap it in 5 minutes

Installing the replacement water filter in the KSCS25FKWH01
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KSCS25FKWH01 filter questions

KSCS25FKWH01 filter light will not turn off — what is the reset step?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KSCS25FKWH01 manual documents the button for each panel variant.

KSCS25FKWH01 with no water filter installed — safe, or does it need a bypass?

No bypass needed: the EDR5RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KSCS25FKWH01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →