Home › Refrigerator Water Filters › Whirlpool › KRFF507EWH00
Water Filter for the KitchenAid KRFF507EWH00 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KRFF507EWH00 specifics — where the filter actually lives
Where the filter actually lives: top-left of the fresh-food compartment in most French-door layouts, away from the door bins, the same estate every French-door bottom-freezer refrigerator in this family uses. It is a twist-lock bay: one twist to release, one to lock; between them you are holding the entire service procedure.
Two quirks worth knowing before you order: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. The badge reads KRFF507EWH00, but the chassis reads KRF: KitchenAid uses it across the French-door bottom-freezer range, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts catalog. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.
KRF vs KSR — what the prefix tells you
Two prefixes, two missions: Chassis first: French-door bottom-freezer (KRF) versus side-by-side chassis (KSR). The shared cartridge line covers both without adaptation. The KRFF507EWH00 code suggests roughly 2015 to 2019 production — approximately right, which is all a parts search needs.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KRFF507EWH00 filter questions
How do I reset the filter light on the KitchenAid KRFF507EWH00?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the KRFF507EWH00 manual’s filter section has the exact control for your trim.
Does the KitchenAid KRFF507EWH00 need a bypass plug when the filter is out?
No bypass needed: the EDR2RXD2 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KRFF507EWH00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR2RXD2. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →