Water Filter for the KitchenAid KFXS25RYBL2 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KFXS25RYBL2 · Quick Facts

TYPE

refrigerator

YEARS MADE

2011-2015

FILTER LOCATION

in the fresh-food compartment, placement dependent on the dispenser package

FILTER SLOT

EveryDrop Filter 4 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

KFXS25RYBL2 · Quick Facts

Filter locationin the fresh-food compartment, placement dependent on the dispenser package

Filter slotEveryDrop Filter 4 bay

Replace everyEvery 6 months

Years made2011-2015

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KFXS25RYBL2. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

KFXS25RYBL2 specifics — where the filter actually lives

On the KFXS25RYBL2, the cartridge in the fresh-food compartment, placement dependent on the dispenser package, the same estate every refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: one twist to release, one to lock; between them you are holding the entire service procedure.

The recurring owner notes: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. The constant across every trim of this machine is the cartridge line — the EDR4RXD1 media line; that is the anchor every compatible listing hangs from. Finish codes such as L2 change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

Reading the KFXS25RYBL2 model code — what the digits tell you

Catalog convention puts the KFXS25RYBL2 near 2011-2015 — an approximation, useful for bracketing the cartridge era only. What stays constant across the trim range: the water path is fixed at the EDR4RXD1 line — that asymmetry is what makes filter shopping simple.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KFXS25RYBL2 filter questions

KFXS25RYBL2 filter light will not turn off — what is the reset step?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the KFXS25RYBL2 owner’s manual lists the button location for your control panel.

Will the KitchenAid KFXS25RYBL2 dispense water without a filter cartridge?

No — run it empty if you like; the EDR4RXD1 bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KFXS25RYBL2?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →