HomeRefrigerator Water FiltersWhirlpoolKFIL27CXMS1

KFIL27CXMS1
Exact-Fit Model Guide

Water Filter for the Kenmore KFIL27CXMS1 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KFIL27CXMS1 replacement water filter cartridge
Replacement cartridge for this model
KFIL27CXMS1 · Quick Facts
TYPE
refrigerator
YEARS MADE
2010-2014
FILTER LOCATION
in the fresh-food compartment, typically the upper back wall in most French-door layouts
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KFIL27CXMS1 · Quick Facts
Filter locationin the fresh-food compartment, typically the upper back wall in most French-door layouts
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2010-2014
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KFIL27CXMS1. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

KFIL27CXMS1 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, typically the upper back wall in most French-door layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Owners of the KFIL27CXMS1 report the same friction points: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The KFI prefix is the tell: generally a French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. The S1 ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

KFI vs KBF — what the prefix tells you

KFI versus KBF is the first fork in the parts catalog: KFI covers French-door, while KBF covers bottom-freezer. The cartridge line is usually shared across both — order by chassis, not by door count. Model-code reading puts the KFIL27CXMS1 at roughly 2010-2014 — treat that as approximately right, not a production guarantee.

Swap it in 5 minutes

Installing the replacement water filter in the KFIL27CXMS1
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KFIL27CXMS1 filter questions

KFIL27CXMS1 filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the KFIL27CXMS1 manual maps the control by panel type.

KFIL27CXMS1 with no water filter installed — safe, or does it need a bypass?

The bay self-seals: with no cartridge the KFIL27CXMS1 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KFIL27CXMS1?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →